Installing the drivetrain for the roller sunblind
Precondition
The roller sunblind is open.
- Guide in drivetrain (3) for the roller sunblind and position it correctly.
- Connect connectors (2) and lock.
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATION
| Drive motor for panorama glass roof to body | ||
| Screw | tightening torque | 5.5 Nm |
Follow-up work
- Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
- Refer to INITIALIZING THE GLASS SLIDE/TILT SUNROOF .