Installing the speaker cover from the door trim panel

• Replace the speaker cover.

  Parts:  Speaker cover

• Saw off all welding pins (1) along the molding (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Pull the handle (1) a little away from the door trim panel as shown and install the speaker cover (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure all the welding pins (arrows) using lock washers (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the handle correctly.
• Insert and tighten repair screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Repair screw to door trim panel
  Oval-head screw M4x10	tightening torque	2.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Handle on door trim panel
  Oval-head screw	Tightening torque	2.0 Nm

Follow-up work 

• Refer to INSTALLING THE SOUND INSULATION ON FRONT DOOR TRIM PANEL .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .