Install the ornamental grille of the bumper panel on the side

Check 

• Check the detents (arrows) on the bumper cover for damage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » Detents (1) are damaged.

  Measure

• Replace the bumper cover.

  Parts:  Bumper cover

• Position ornamental grille (1) and clip it into the detents (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FOG LIGHT SUPPORT .
• Refer to PARTIALLY INSTALLING THE BUMPER BRACKET .
• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
• Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE FRONT HOOD SEAL .