Removing the covers for the interior rearview mirror

Version A:
Release cover (1) in the middle with a suitable plastic wedge from the latch mechanisms and remove.

Courtesy of BMW OF NORTH AMERICA, INC.
Version B:
Release the cover panel (1) from the detents (2) with a suitable plastic wedge and remove laterally.

Courtesy of BMW OF NORTH AMERICA, INC.
Version C:
Release cover (1) from the clamps (2) in the marked area using a suitable plastic wedge and pull down a certain distance.
Release cover (1) at the retaining lugs (3) and remove from the guides to the rear.

Courtesy of BMW OF NORTH AMERICA, INC.
Release cover (1) from the detents (2) and (3) and remove sideways.
Remove cover (1) from mirror base (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Version D:
Release covers (1) and (2) using a suitable plastic wedge at the separation point (3) and remove to the side.

Courtesy of BMW OF NORTH AMERICA, INC.