Remove A-pillar trim panel, left and right
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the A-pillar trim panel
Removing the hands-free microphone
- Remove the hands-free microphone (1)
from the A-pillar trim panel (2) with special tool 0 493 681 (64 1 020)
.
- Disconnect the plug connection (1)
and remove the hands-free microphone (2)
.
- Loosen screw (1) .
- Unclip the A-pillar trim panel (2)
at the clip (3)
and feed out towards the top.