Install the holder of the positive battery cable

CAUTION: Improper routing of the positive battery cable. 
Risk of short circuits! 

• Route the positive battery cable without abrasions and do not trap.

• Feed in bracket (2)  of positive battery cable and position.
• Tighten the screws (1)  .

TIGHTENING TORQUE SPECIFICATIONS

Holder, positive battery cable to cylinder head cover
Self-tapping plastic screw 6 x 18	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

• Secure cable (1)  in clamps (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Secure clamp (1)  to holder (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the clamps (1)  to holder (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.