Remove rear seat backrest

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.

When removing the rear seat backrest (1) , make sure that the backrest cover is not damaged by the floor panel (2) in the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the screws (1) and remove the rear seat backrest (2) .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.

When installing rear seat backrest (1) , ensure that the backrest covering in the marked area is not damaged by floor panel (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Position rear seat backrest (2) .

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Outer bearing of the rear seat backrest to body
Oval-head screw	Tightening torque	42 Nm

Courtesy of BMW OF NORTH AMERICA, INC.