Installing the sun visors and counter support on the left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

Install the sun visor and the counter support

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Check the guides (1) at the cover of the counter support for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip the counter support (3) into the headlining.
Make sure the clamps (2) are engaged correctly.
Clip in the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Position sun visors (2).
Connect connector (3).

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Sun visor to body
Oval-head screw	Tightening torque	4 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Close the covers (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the sun visor (1) on the counter support (2).

Courtesy of BMW OF NORTH AMERICA, INC.