11 24 Connecting Rod With Bearing (M4 2021-2023)
11 24 TIGHTENING TORQUE OVERVIEW
| Connecting rod bearing cap to connecting rod | ||
| M9x1.25 Replace screws. Suction off crack surfaces. |
1. Tightening torque | 6 Nm |
| 2. Tightening torque | 30 Nm | |
| 3. Angle of rotation | 75° | |
| 4. Unscrew all bolts. | 180° | |
| 5. Tightening torque | 6 Nm | |
| 6. Tightening torque | 30 Nm | |
| 7. Angle of rotation | 75° | |
| 8. Unscrew all bolts. | 180° | |
| 9. Tightening torque | 6 Nm | |
| 110 Joining torque | 30 Nm | |
| 11. Angle of rotation | 75° | |