51 11 Bumper, Front
51 11 TIGHTENING TORQUE OVERVIEW
| Adapter, front axle support to front axle support | ||
| M8x70 | tightening torque | 19 Nm |
| Bumper bracket, side front | ||
| screw | Tightening torque | 3 Nm |
| Bumper cover, front, top | ||
| Oval-head screw M6 | tightening torque | 4.6 Nm |
| Cooler module mount to adapter of front subframe | ||
| M6 | Tightening torque | 8 Nm |
| Deformation element, bottom to adapter, front axle support | ||
| M10x60 screw | Tightening torque | 40 Nm |
| Frame to adapter of front subframe | ||
| M10x60 | Tightening torque | 40 Nm |
| Front bumper bracket to engine mount | ||
| Hexagon screw with flange Replace screw |
Tightening torque | 100 Nm |
| Angle of rotation | 180° | |
| Front bumper cover on underbody protection | ||
| Hexagon screw for thermoplastic | Tightening torque | 2.6 Nm |
| Front bumper panel to fender | ||
| Torx screws 5x35 | Tightening torque | 3 Nm |
| Front spoiler | ||
| Oval-head screw | Tightening torque | 2.6 Nm |
| Lateral attachment part to bumper cover | ||
| Hexagon screw | Tightening torque | 2.5 Nm |
| License plate baseplate | ||
| Oval-head screw | Tightening torque | 2.5 Nm |
| Support for front bottom bumper cover to deformation element | ||
| Combination oval-head machine screw | tightening torque | 10 Nm |
| Vertical connection to deformation element | ||
| Hexagon screw | Tightening torque | 21 Nm |
| Vertical connection to deformation element | ||
| Flat-head screw M6x20 | Tightening torque | 11.8 Nm |