51 71 Gaskets And Loose Body Parts
51 71 TIGHTENING TORQUE OVERVIEW
| Bulkhead lower part on body | ||
| screw Plastic nut |
Tightening torque Tightening torque |
2.6 Nm 2.6 Nm |
| Connecting support on tunnel to body | ||
| Hexagon screw with flange M10x25 screw |
Tightening torque Tightening torque Angle of rotation |
28 Nm 56 Nm 90° |
| Cover, steering unit | ||
| screw | Tightening torque | 3 Nm |
| Cowl upper part to bottom cowl | ||
| Tightening torque | 3 Nm | |
| Lower side cover at front | ||
| Hexagon screw for thermoplastic | Tightening torque | 2.6 Nm |
| Strut brace/front-end strut to holder | ||
| hexagon nut M8 | Tightening torque | 28 Nm |
| Tension strut on bulkhead | ||
| M10x35 screw Replace screws. |
Tightening torque Angle of rotation |
56 Nm 90° |
| Tension strut to shock tower | ||
| M10x70 screw Replace screws. |
Tightening torque Angle of rotation |
56 Nm 90° |
| Wheel arch cover | ||
| screw Plastic nut |
Tightening torque Tightening torque |
3 Nm 2.6 Nm |
| Wheel arch trim panel, front | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |