If installed: Securing the engine oil cooler

Remove cable tie (2).
Position engine oil cooler (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Guide In and Install engine oil cooler (2) on holder (3) In the arrow direction.
Ensure that lock (1) snaps in audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATION

Engine oil cooler on bumper bracket
M6X25	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATION

Lower side cover at front
Hexagon screw for thermoplastic	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.