If installed: Install underbody protection for the steering

Precondition 

Front underbody protection is removed.

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the underbody protection (1).
• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Underbody protection steering on front subframe
  Multi-purpose bolt M10	Tightening torque  56 Nm

  TIGHTENING TORQUE SPECIFICATION
  
  

  Underbody protection steering on front subframe
  Hexagon screw M6	Tightening torque  8 Nm