Removing the cylinder head from the assembly jig

CAUTION: Heavy component .
Heavy components can lead to injury or damage .

Remove and install heavy components with the aid of another person/other persons.

Release the screws (1) from the special tool 0 494 150 (11 9 440) .

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (2) .
Feed out rod (1) in arrow direction and set aside.

Courtesy of BMW OF NORTH AMERICA, INC.
Stage the special tool (workshop crane) 2 220 718 .

Courtesy of BMW OF NORTH AMERICA, INC.
Prepare the special tool 0 490 567 (11 0 020) .

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the special tool 0 490 567 (11 0 020) at the cylinder head (1) .
Attach the special tool 0 490 567 (11 0 020) to the workshop crane 2 220 718 .

Courtesy of BMW OF NORTH AMERICA, INC.
Feed out and remove the cylinder head (1) with the workshop crane 2 220 718 and special tool 0 490 567 (11 0 020) from the device (2) .

Courtesy of BMW OF NORTH AMERICA, INC.