Checking the position of the intake camshaft (cylinder head removed)
Check
- Check position of the intake camshaft on the respective cylinders.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Result
» Cam (1)
of the intake camshaft runs on the intermediate lever (2)
.
Measure
- Continue turning intake camshaft (3)
with a conventional open-end wrench until the cam (1)
does not run on the intermediate lever (2)
.
Check
- Check position of the intake camshaft on the respective cylinders.
Courtesy of BMW OF NORTH AMERICA, INC.
|
Result
» Cam (1)
of the intake camshaft runs on the intermediate lever (2)
.
Measure
- Continue turning intake camshaft (3)
with a conventional open-end wrench until the cam (1)
does not run on the intermediate lever (2)
.