Installing fan cowl

• Feed guides (1)  into the radiator.
• Feed guides (2)  into the charge air cooler.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carefully  feed in and install the fan cowl (3)  in the direction of the arrow.
• Ensure that the locking mechanism (2)  engages audibly.
• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (2)  and lock.

  The connector (2)  must engage audibly.

• Connect connectors (1)  and lock.

  The connector (1)  must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• If installed:  Fasten the coolant line (1)  on to the clamps (arrows).
• Lock the clamps (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

• If installed:  Attach the transmission oil line (2)  .

  Feed in and install the transmission oil line (2)  .

  Lock holder (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING UPPER CROSS CONNECTION .
• Refer to IF INSTALLED: INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT (PARTIALLY REMOVED) .
• Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
• Refer to INSTALLING THE FRONT HOOD SEAL .