Removing the speaker cover from the front door trim panel

• Loosen screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Drilling out the spot-welds 

Spot-welds or attachment points 

Courtesy of BMW OF NORTH AMERICA, INC.

Arrow Spot-welds (removal) or attachment points (installation) 

• Drill out and/or grind down the marked spot-welds (arrows).

• Slightly compress detentes (1)  with long-nose pliers and disengage downwards.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carefully release the upper section of storage compartment in the door (1)  as shown from the frame until the welding pin release the speaker cover (2)  .

  Detentes must be disengaged as described in the preceding work step.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Protect the storage compartment in the door and cover as shown with adhesive tape (1)  in the entire area of the speaker cover (2)  against scratches.
• Additionally wrap the storage compartment in the door in the area (3)  with adhesive tape to fasten the remaining adhesive tape in a better way.

Courtesy of BMW OF NORTH AMERICA, INC.

Remove speaker cover 

Speaker cover (removal) 

Courtesy of BMW OF NORTH AMERICA, INC.

• With a support person, pull the storage compartment on the door (1)  and cover (2)  away from the support until the cover (2)  fully exposes the speaker cover (3)  .
• Very carefully feed out and remove the speaker cover (3)  from the door trim panel.

  The speaker cover (3)  must be removed very carefully  to avoid damaging the storage compartment on the door.