Installing the front carpet
- Lay removed carpet on the new carpet (1) and transfer cuts to new carpet (1) .
- Cut off the highlighted area (2)
on the new carpet (1)
.
- Install the carpet (1) in the car.
- Make sure the carpet (1)
is positioned correctly at all adjacent parts and in area of heating and air-conditioning unit.
- Clip in the wiring harness (1) on to the brackets and connect and lock the connectors.
Follow-up work
- Refer to INSTALLING THE SPEAKER TRIM ON THE LEFT AND RIGHT CENTER BASS .
- Refer to INSTALLING THE CENTER CONSOLE .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to INSTALLING THE STORAGE COMPARTMENT IN THE FRONT CENTER CONSOLE .
- Refer to INSTALLING THE OPERATING FACILITY IN THE CENTER CONSOLE .
- Refer to INSTALLING THE WIRELESS CHARGING STORAGE .
- Refer to INSTALLING THE DECORATIVE TRIM ON THE LEFT AND RIGHT OF THE CENTER CONSOLE .
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING TRIM IN STORAGE COMPARTMENT OF CENTER ARMREST .
- Refer to INSTALLING THE CUP HOLDER .
- Refer to INSTALLING SIDE TRIM PANEL IN FOOTWELL ON RIGHT A-PILLAR .
- Refer to INSTALL RIGHT FOOTWELL TRIM .
- Refer to INSTALL THE SIDE TRIM PANEL IN THE FOOTWELL AT THE LEFT A-PILLAR .
- Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
- Refer to INSTALLING LEFT AND RIGHT DOOR SILL COVER STRIP .
- Refer to INSTALLING ACCELERATOR PEDAL MODULE .
- Refer to INSTALLING THE LEFT AND RIGHT FRONT SEAT .