Installing the window guide bar trim

Insert the window guide bar trim (2) in the door.
Tighten down screws (3) .

TIGHTENING TORQUE SPECIFICATION

Trim for window guide web on door frame
Oval-head screw M4x8	Tightening torque	2.6 Nm

G14643632

Courtesy of BMW OF NORTH AMERICA, INC.

Thread the rubber window seal (1) into the window guide bar trim (2) .

Follow-up work

Refer to INSTALL WINDOW CHANNEL STRIP ON THE REAR DOOR .
Refer to INSTALLING THE WINDOW CHANNEL STRIP OF THE INNER REAR DOOR .
Refer to INSTALLING THE COVER ON THE INSIDE OF THE WINDOW FRAME AT THE REAR .
Refer to INSTALLING THE REAR DOOR TRIM PANEL .