Removing the front emblem
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components
Scratches, surface damage
Careless handling of tools and sharp-edged components
Scratches, surface damage
- Protect working area
- Handle tools and components carefully
- Mask off the working area with plastic adhesive tape to prevent paint damage
- Heat the emblem (1) carefully with a hot air blower and release it from the adhesive strip with the special tool 0496 571 (00 9 327)
TECHNICAL DATA SPECIFICATION
| Heating using hot air blower | ||
| Surface temperature | 40°C... 50°C | |
- Carefully lever out the badge (1) from the grommets (2) and remove it
- Remove the adhesive residue from the hood
CONSUMABLE SPECIFICATION
| Adhesive remover | 1 L, Can | 83110009712 |