(Partially releasing the engine oil cooler)

WARNING: Hot surfaces 
Risk of burning! 

• Perform all work only on components that have cooled down

NOTE: TECHNICAL INFORMATION 
The work must be performed with vehicle care to prevent component damage

• Drill out the rivet (1)
• Remove the damper (2)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed out the engine oil cooler (1) in the arrow direction, remove it and set aside

Courtesy of BMW OF NORTH AMERICA, INC.