Removing the connecting bracket from the exhaust turbocharger for the cylinders 4 to 6

Preliminary work 

• Refer to REMOVING THE FRONT-END STRUT .
• Refer to REMOVING THE RIGHT INTAKE FILTER HOUSING (FRONT-END STRUT REMOVED) .
• Refer to REMOVING CLEAN AIR PIPE CYLINDERS 4-6 .
• Refer to PARTIALLY REMOVING THE COOLANT EXPANSION TANK OF THE HIGH-TEMPERATURE COOLANT CIRCUIT .

• Keep all the standard tools ready:

  Number	Description
  1	Commercially available reversible ratchet (1/4)
  2	Extension (1/4)
  3	Swiveling extension (1/4)
  4	External Torx E8

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)
• Feed out the connecting bracket (2) for cylinders 4 to 6 and remove it

Courtesy of BMW OF NORTH AMERICA, INC.