11 41 ENGINE OIL PUMP (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
1141 TIGHTENING TORQUE OVERVIEW
| Cover to oil pump | ||
| M6X20 | Tightening torque | 8 Nm |
| Hydraulic valve to crankcase | ||
| M6 x 18 | tightening torque | 8.5 Nm |
| Oil pump to crankcase | ||
| M8 Replace screw |
1. Tightening torque | 15 Nm |
| 2. Angle of rotation | 45° | |
| Sprocket to oil pump | ||
| M8 Important - left-hand thread Replace screw |
1. Tightening torque | 5 Nm |
| 2. Angle of rotation | 90° | |
| Sprocket wheel cover to oil pump | ||
| M6X20 | Tightening torque | 8 Nm |