11 21 CRANKSHAFT INCREMENT WHEEL (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
11 21 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Joining torque | 5.0 Nm | |||
| Torque angle | 45° | |||
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | |
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm |