11 11 MAIN BEARING CAP (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
1111 TIGHTENING TORQUE OVERVIEW
| Main bearing cap to crankcase | ||
| M10x85 11.9 Replace screws |
1. Tightening torque | 25 Nm |
| 2. Angle of rotation | 65° | |
| 3. Angle of rotation | 65° | |
| Special tool 11 8 930 to special tool 00 2 320 | ||
| M14x35 | tightening torque | 160 Nm |
| Special tool 2 413 082 to special tool 00 2 320 | ||
| M12x65 | Tightening torque | 100 Nm |
| Stud bolt on cylinder head | ||
| M7X58 | tightening torque | 12 Nm |