11 00 ENGINE, GENERAL (M3 base, M3 Competition, M3 Competition M xDrive, M3 CS)
1100 TIGHTENING TORQUE OVERVIEW
| Engine mounting bracket on assembly jig | ||
| M14 x 95 | Tightening torque | 130 Nm |
| Engine mount to engine mounting bracket | ||
| Hexagon screws from special tool set | Tightening torque | 105 Nm |
| Motor mount on the engine stand | ||
| M10 | Tightening torque | 100 Nm |
| Special tool 2 318 635 on special tool 00 6 041 | ||
| M8 | Tightening torque | 19 Nm |
| Special tool 2 411 718 to crankcase | ||
| M10x30 | tightening torque | 38 Nm |
| Special tool to cylinder head | ||
| M8 | Tightening torque | 21.5 Nm |
| Standard screw connection | ||
| M8 | Tightening torque | 21.5 Nm |
| Oval-head screw | Tightening torque | 4 Nm |
| Standard screw connection hose clamp 5 | ||
| Hose clamp L12 - L15 | tightening torque | 1.25 Nm |
| Standard screw connection M10 | ||
| M10 | Tightening torque | 38 Nm |
| Standard screw connection M5 | ||
| M5 | Tightening torque | 5 Nm |
| Standard screw connection M6 | ||
| M6 | Tightening torque | 8 Nm |
| Standard screw connection M7 | ||
| M7 | Tightening torque | 13 Nm |
| Standard screw connection M8 | ||
| M8 | Tightening torque | 19 Nm |