Installing sound insulation at the center of the firewall upper part

Check the seal on the bottom of the sound insulation (2) for damage, replace if necessary.
Position the sound insulation (2) .

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Sound insulation to firewall upper part
Screw	8.0 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in the sealing (2) in the direction of arrow.
Mount expanding rivet (1) .
Secure positive battery cable at the sealing (2) .

Courtesy of BMW OF NORTH AMERICA, INC.