1161 INTAKE SYSTEM (M240i and M240i xDrive coupe/convertible)
1161 INTAKE MANIFOLD - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Dimension | |
|---|---|---|---|
| 1 AZ Intake manifold to cylinder head | All | M8 | 22 Nm |
| All | M7 | 15 Nm | |
| All | M6 | 10 Nm | |
| 2AZ Sound absorption cover to holder | M60/1/M60/2/M62 | M6 | 8 Nm |
| 3AZ Throttle valve to intake manifold | N73 | M6x60/M6x80 | 8 Nm |
1161 TIGHTENING TORQUE OVERVIEW
| Front/rear support for intake system to engine block | ||
| M6x16 | Tightening torque | 10 Nm |
| Tank vent line to intake plenum | ||
| TS5x16 | Tightening torque | 5 Nm |
| Wiring harness to intake plenum | ||
| Tightening torque | 5 Nm | |