51 71 447 Removing and installing or replacing trim panel for cover on left or right side member

Necessary preliminary tasks: 

• Refer to REMOVING DOOR SILL COVER STRIP .

Release expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip trim panel (1) at front and rear.

Open the door and remove the trim panel (1) in direction of arrow and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Latch mechanisms (1) on holder (2) must not be damaged.

Courtesy of BMW OF NORTH AMERICA, INC.