Installing the tension struts at the rear axle
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
- Install the left tension strut (5).
- Replace screws (4).
Parts: Screws
- Tighten the screws (4).
- Replace the screw (3).
Parts: Screws
- Tighten down screw (3).
- Replace the screw (2).
Parts: Screw
- Tighten down screw (2).
- Tighten the screws (1).
- Install the right tension strut (5).
- Replace screws (4).
Parts: Screws
- Tighten the screws (4).
- Replace the screw (3).
Parts: Screw
- Tighten down screw (3).
- Replace the screw (2).
Parts: Screw
- Tighten down screw (2).
- Tighten the screws (1).