12 63 586 Replacing power distribution module (230i and 230i xDrive coupe/convertible)

Necessary preliminary tasks:

Removal:

Remove cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect plugs (1).

Unlock and disconnect plugs (2).

Loosen the wiring harness from the holder (3) and put to one side.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and loosen all connectors (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and loosen all connectors (1) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect plugs (1).

Unlock lock (2) and detach.

Feed out and remove power distribution box (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Thread in power distribution box (3) and install.

Lock (2) must snap audibly into place.

Attach and lock connector (1).

Connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Connect and lock all connectors (1) along the arrows.

All connectors (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Connect and lock all connectors (1).

All connectors (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connector (2) and lock.

Attach and lock connector (1).

All connectors must audibly engage.

Insert and secure the wiring harness to the holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: