Installing the ignition coils

NOTE: RISK OF DAMAGE
Damage to the catalytic converter due to misfiring.
An incorrectly mounted ignition coil can loosen during engine operation, thereby causing misfiring.

Ensure that the sealing lip fits correctly on the ignition coil so that it can seal correctly. Do not crush the sealing lip.

NOTE: The description is provided only at one component. The procedure is the same for all other components.

Insert and install the ignition coil (3) .

Tighten down screw (2) .

TIGHTENING TORQUE SPECIFICATIONS

Ignition coil
M6x31.8	Tightening torque	8 Nm

Connect and lock the connector (1) .
The connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.