Disassembling cylinder head from the special tool (exhaust turbocharger removed)

NOTE: To provide a better overview: View from below.

Release the screw from the special tools 0 494 368 (11 9 003) and 0 494 369 (11 9 004) .

Courtesy of BMW OF NORTH AMERICA, INC.
Position cylinder head on the special tool 0 494 362 (11 9 000) so that the exhaust turbocharger can be mounted.
Position special tool 0 494 369 (11 9 004) centered under the cylinder head.
Secure cylinder head with screw (1) on special tool 0 494 369 (11 9 004) .

Courtesy of BMW OF NORTH AMERICA, INC.
Replace bearing journal (1) .
Parts: Bearing journal
Install guide rail (2) from above.

Tighten the bearing journals (1) .

TIGHTENING TORQUE SPECIFICATIONS

Bearing journal to cylinder head
Replace bearing journal.	20 Nm

Courtesy of BMW OF NORTH AMERICA, INC.