Removing acoustic cover at rear
WARNING:
Hot surfaces
.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING THE LEFT COVER IN THE ENGINE COMPARTMENT .
- Refer to REMOVING THE RIGHT COVER IN THE ENGINE COMPARTMENT .
- Refer to REMOVING THE TENSION STRUT ON THE STRUT TOWER .
- Refer to REMOVING THE SOUND INSULATION ON THE ON THE CENTER OF THE FIREWALL UPPER PART .
- Feed out and remove acoustic cover (1) upwards out of the guides in the marked areas.