1153 HEAT EXCHANGE MODULE, TURBOCHARGER COOLANT LINES (M240i and M240i xDrive coupe/convertible)
1153 TIGHTENING TORQUE OVERVIEW
| Connecting bracket to engine block | ||
| M6x25 | Tightening torque | 10 Nm |
| Coolant feed line/coolant return line to exhaust turbocharger | ||
| M6x12 | Tightening torque | 8 Nm |
| Coolant feed line to engine block | ||
| M6x12 | Tightening torque | 8 Nm |
| Coolant return line to cylinder head | ||
| M6x12 | Tightening torque | 8 Nm |
| Coolant return line to trim strip | ||
| M6x12 | Tightening torque | 8 Nm |
| Heat management module to engine block | ||
| Captive screws | Tightening torque | 8 Nm |