63 10 004 Adjusting headlights (2' Series coupe and convertible, 2017-2021)

COMPLY  with test prerequisites for headlight adjustment.

Carry out headlight adjustment at adjusting screws (1) and (2).

1. Adjustment screw primarily for vertical adjustment
2. Adjusting screw primarily for lateral adjustment
3. Adjust the height at the adjusting screw (1)

   Courtesy of BMW OF NORTH AMERICA, INC.

   US version only: 

   Only carry out the setting of the lateral adjustment when the securing plug in the adjusting screw for the lateral adjustment IS MISSING OR IS DAMAGED .

   If necessary, remove the damaged plugs

4. Make the lateral adjustment at the adjusting screw (2)

After headlight adjustment: 

Perform reference run. For this purpose, switch off and on the headlights. Check again headlight adjustment.

US version only: 

If the lateral adjustment was corrected, use a suitable tool to push new plug into the ADJUSTING SCREW FOR THE LATERAL ADJUSTMENT without damaging it  .