6135 Lighting Control Units
6135 CONTROL UNITS (P L7) - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Control unit for Car Access System | F2x/F3x/F8x | 3.3 Nm | ||
| 2AZ Control unit for camera-based driver support systems (KAFAS) | F2x/F3x/F8x | 3.3 Nm | ||
| 3AZ Central Gateway Module | F2x/F3x/F8x | 3.3 Nm | ||
| 4AZ Rear electronic module to body | F2x/F3x/F8x | 3.3 Nm | ||
| 5AZ Holder to FEM FEM to A-pillar |
F2x/F3x/F8x | Screw | 1.7 Nm | |
| 6AZ Battery charger module on body | F2x/F3x | M6 | 8 Nm | |
| 7AZ Interior aerial to center console | F2x/F3x/F8x | Screw | 1.8 Nm | |
| 8AZ Rear power distribution box to body Control unit holder to body |
F2x/F3x/F8x | Plastic nut | 2.6 Nm | |
| 9AZ Regulated differential lock control unit to holder Regulated differential lock ground connection to holder |
F8x | M6 | 8.8 Nm |