Removing and installing/replacing underbody protection (front) (2019-2022)

Removal: 

Loosen marked screws on left and right.

Remove cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen the marked screws and remove the underbody protection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Only M4 GTS for replacement: 

Rework underbody protection.

Install the underbody protection (1) and tighten the screws.

Courtesy of BMW OF NORTH AMERICA, INC.

Install the cover in the lower wheel arch (1) and tighten the screws.

Courtesy of BMW OF NORTH AMERICA, INC.