Adjusting headlights (2016-2022)
COMPLY with test prerequisites for headlight adjustment.
CAUTION:
Do not damage adjusting screws when adjusting headlights.
Carry out headlight adjustment at adjusting screws (1) and (2).
- Adjustment screw primarily for vertical adjustment
- Adjusting screw primarily for lateral adjustment
- Adjust the height at the adjusting screw (1)
US version only:
Only carry out the setting of the lateral adjustment when the securing plug in the ADJUSTING SCREW FOR THE LATERAL ADJUSTMENT IS MISSING OR IS DAMAGED .
If necessary, remove the damaged plugs
- Make the lateral adjustment at the adjusting screw (2)
After headlight adjustment:
Perform reference run. For this purpose, switch off and on the headlights. Check again headlight adjustment.
US version only:
If the lateral adjustment was corrected, use a SUITABLE TOOL TO PUSH NEW PLUG INTO THE ADJUSTING SCREW FOR THE LATERAL ADJUSTMENT without damaging it.