Removing steering column shroud lower section
NOTE:
Perform the steps on the right and left side.
- Push retaining lug (1) to the outside and unclip the lower part of the steering column shroud (2) downwards.
- Tilt steering column shroud lower section in downward direction.
- Unlock and disconnect the plug connections (1) and (2).
- Remove the line (1) from the holder (2).
- Feed the line (1) out of the guide (3).
- Unclip the gap cover (1) from the steering column shroud lower section (2) (arrows) and remove the steering column shroud lower section (2).