Carrying out ride height adjustment
NOTE:
TECHNICAL INFORMATION
After the expansion or exchange of the ride height sensor or of the attachment rod of the ride height sensor and after the replacement of the control unit for the vertical dynamic platform (VDP), a ride height adjustment must always be carried out.
After the expansion or exchange of the ride height sensor or of the attachment rod of the ride height sensor and after the replacement of the control unit for the vertical dynamic platform (VDP), a ride height adjustment must always be carried out.
- Connect diagnostic system.
- Switch the ignition on.
- Carry out ride height calibration.
- Service function
- Chassis
- VDP
- Ride height adjustment
Follow-up work
- Refer to ADJUSTING HEADLIGHTS .