3231 Steering Column
3231 TIGHTENING TORQUE OVERVIEW
| Bearing plate to firewall | ||
| M6 | tightening torque | 8 Nm |
| Lower steering shaft to steering column | ||
| Clamping bolt M8 Recut screw thread. Replace clamping bolt. No retorque permitted! |
tightening torque | 28 Nm |
| Steering column to dashboard support | ||
| M8 Observe tightening sequence. |
Tightening torque | 21.4 Nm |
| Steering shaft to universal joint | ||
| M8 Recut screw thread. Replace clamping bolt. No retorque permitted! |
Tightening Torque | 28 Nm |
| Universal joint to steering box | ||
| M8 Recut screw thread. Replace clamping bolt. No retorque permitted! |
tightening torque | 28 Nm |