Installing the rear center console trim
- Check the clips (1).
Replace broken or missing clips (1).
- Check guides (2).
If the guides (2) are faulty, replace the rear center console trim.
- Attach center console trim (2).
- Secure the wiring harness to the rear center console trim (2) and connect the connectors.
- Position center console trim (2) correctly at the back and clip in on the clamps (3).
- Replace nuts (1).
Parts: Nuts
- Tighten nuts (1).
TIGHTENING TORQUE SPECIFICATIONS
| Rear center console trim on body | ||
|---|---|---|
| Nuts Replace nuts |
tightening torque | 4.6 Nm |
Installing the rear seat
- Guide in seat belt buckles (3), position rear seat (1) and clip it into clamps (2).