Partially installing the backrest covering with the cushion for the front seat

• Attach holder (1).
• Replace nuts (2).

  Parts:  Nuts

• Tighten nuts (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Airbag on the backrest frame
  Nut Replace nut.	tightening torque	6.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the backrest covering (5) on the detents (4) (arrows).
• Attach the edge stripping (3).
• Connect and lock the connector (2) and clip in the cable bracket.
• Close the zipper (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the detents (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the trim for the seat release (2).
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.