Installing the inner door sill cover strip on the left and right

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the inner door sill cover strip

Unclip clamps (1) from lower B-pillar trim panel and front side trim panel.
Check the clamps (1) and the clips (2) for damage, replace if necessary.
Attach clamps (1) and clips (2) to inside door sill cover strip.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the inner door sill cover strip with the clamps (1) and the clips (2).

Courtesy of BMW OF NORTH AMERICA, INC.