Installing gap seal for B-pillar

Clean bonding surface (1) on the door.
CONSUMABLE SPECIFICATION

Cleaning agent R1 100 ml, Bottle 83192211217

Courtesy of BMW OF NORTH AMERICA, INC.
Position the gap seal on the B-pillar (1) correctly on the door.
Glue the gap seal on the B-pillar (1) as follows:
- Detach the liner 2 bit by bit
- Align seal for B-pillar 1 and press gently
- Check the position of the seal for B-pillar 1 and correct as needed.
- Affix the seal for B-pillar 1 with firm thumb pressure
Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the clip (1).

G15685273

Courtesy of BMW OF NORTH AMERICA, INC.