Replacing the cylinder head (remounting components)

• Release the venting connector (1) at the cylinder head (3).
• Release the coolant temperature sensor (2) at the cylinder head (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the cylinder head (3).

  Parts:  Cylinder head

• Tighten venting connector (1) on cylinder head (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Venting connector/special tool to cylinder head
  M10	18 Nm

• Tighten the coolant temperature sensor (2) on the cylinder head (3).

Courtesy of BMW OF NORTH AMERICA, INC.