Installing oil filler neck
- Replace the sealing ring (2) on the oil filler neck (1).
Parts: Sealing ring
- Coat the sealing ring (2) with the recommended engine oil.
ENGINE OIL DESCRIPTION
| Technically suitable engine oils for BMW Group engines |
- Position oil filler neck (1).
- Turn oil filler neck (1) about 15° counterclockwise.
- Tighten screw (2) on the oil filler neck (3).
TIGHTENING TORQUE SPECIFICATIONS
| Oil filler neck | ||
|---|---|---|
| M6x16 | tightening torque | 10 Nm |
- Tighten screw (1) on the oil filler neck (3).
TIGHTENING TORQUE SPECIFICATIONS
| Oil filler neck | ||
|---|---|---|
| M6x16 | tightening torque | 10 Nm |
Follow-up work
- Refer to INSTALLING CLEAN AIR PIPE OF CYLINDER BANK 1 .
- Refer to CONNECTING THE RIGHT CHARGE AIR LINE TO THE EXHAUST TURBOCHARGER .
- Refer to INSTALLING LEFT INTAKE FILTER HOUSING WITH LEFT FRONT-END STRUT .
- Refer to INSTALLING THE RIGHT INTAKE FILTER HOUSING WITH THE RIGHT FRONT-END STRUT .
- Refer to INSTALLING THE COVER OF THE RIGHT DME CONTROL UNIT .
- Refer to INSTALLING ACOUSTIC COVER .