Install the acoustic cover for the oil sump

• Insert and install the acoustic cover of the oil sump.
• Feed in all the expanding rivets (1) in the marked area and install.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).
• Make sure the connector (1) engages audibly.
• Secure clamps (2).
• Insert and install the positive battery cable (4).
• Secure positive battery cable (4) at the clamp (5).
• Tighten the nut (3) hand-tight.

Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly  attach the positive battery cable (1) to the anti-twist lock (2).
• Tighten nut (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• INSTALLING THE STIFFENING PLATE .
• INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• INSTALLING UNDERBODY PROTECTION AT REAR .
• CONNECTING ALL BATTERY GROUND LEADS .