Installing the belt tensioner
- Position belt tensioner (1) .
- Tighten the screw on the belt tensioner with a suitable socket wrench (2)
.TIGHTENING TORQUE SPECIFICATIONS
Belt tensioner M10 Tightening torque 40 Nm
Follow-up work
- Refer to INSTALLING DRIVE BELT .
- Refer to PARTIALLY FASTENING THE COOLANT EXPANSION TANK FOR THE LOW-TEMPERATURE COOLANT CIRCUIT .
- Refer to INSTALLING FAN COWL .
- Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
- Refer to INSTALLING UPPER CROSS CONNECTION .
- Refer to INSTALLING BOTH FRONT-END STRUTS .
- Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .